The LEDs of your NWA/WAC can be controlled such that they stay lit (ON) or OFF after the NWA/WAC is ready. There are two features that controls the LEDs of your NWA/WAC - Locator and Suppression.
The LED Suppression feature allows you to control how the LEDs of your NWA/WAC behave after it’s ready. The deafult LED suppression setting of your AP is different depending on your NWA/WAC model.
You can go to the Maintenance > LEDs > Suppression screen to see the default LED behavior and change the LED suppression setting. After you make changes in the suppression screen, it will be stored as the default when the NWA/WAC is restarted. See (LEDs) for information on default values for different models.
Note: When the NWA/WAC is booting or performing firmware upgrade, the LEDs will lit regardless of the setting in LED suppression.
|
label |
description |
|---|---|
|
Suppression On |
If the Suppression On check box is checked, the LEDs of your NWA/WAC will turn off after it’s ready. If the check box is unchecked, the LEDs will stay lit after the NWA/WAC is ready. |
|
Apply |
Click Apply to save your changes back to the NWA/WAC. |
|
Reset |
Click Reset to return the screen to its last-saved settings. |
The Locator feature identifies the location of your WAC among several devices in the network. You can run this feature and set a timer in this screen.
To run the locator feature, enter a number of minutes and click Turn On button to have the WAC find its location. The Locator LED will start to blink for the number of minutes set in the Locator screen. The default setting is 10 minutes. While the locator is running, the turn on button will grey out and return after it’s finished. If you make changes to the time default setting, it will be stored as the defualt when the WAC restarts.
Note: The Locator feature is not affected by the Suppression setting.
|
label |
description |
|---|---|
|
Turn On Turn Off |
Click Turn On button to activate the locator. The Locator function will show the actual location of the WAC between several devices in the network. Otherwise, click Turn Off to disable the locator feature. |
|
Automatically Extinguish After |
Enter a time interval between 1 and 60 minutes to stop the locator LED from blinking. Default is 10 minutes. |
|
Apply |
Click Apply to save changes in this screen. |
|
Refresh |
Click Refresh to update the information in this screen. |