Monitor: Management
Overview
This section provides information for Management in Monitor.
This chapter describes how to view management settings on the Switch.
Syslog
Use this screen to view Switch syslog management. Click Monitor > Management > Syslog.
Each field is described in the following table.
Monitor > Management > Syslog 
Label
Description
Logging Filter Select
Target
Select Buffered or Flash.
Buffered: Login saved to temporary memory.
Flash: Login saved to permanent memory.
Severity
This field displays two options: Available and Acting.
Severity type: crit, emerg, alert, error, warning, notice, info, and debug.
Available
Click < to move a severity type from the acting box to the available box.
Click > to move a severity type to the acting box from the available box.
Acting
Click < to move a severity type from the acting box to the available box.
Click > to move a severity type to the acting box from the available box.
>
Click > to move a severity type to the acting box from the available box.
<
Click < to move a severity type from the acting box to the available box.
View
Click View to display results.
Clear
Click Clear to clear results.
Show System Log
The syslog protocol allows devices to send event notification messages across an IP network to syslog servers that collect the event messages. A syslog-enabled device can generate a syslog message and send it to a syslog server
No.
This field displays the number you are viewing.
Timestamp
This field displays the timestamp.
Category
This field displays the category.
Severity
This field displays the severity.
Message
The syslog protocol allows devices to send event notification messages across an IP network to syslog servers that collect the event messages. A syslog-enabled device can generate a syslog message and send it to a syslog server.
Error Disable
This link takes you to a screen where you can view CPU protection and error disable recovery.
Use this screen to view Switch global and port error disable management. Click Monitor > Management > Error Disable.
Each field is described in the following table.
Monitor > Management > Error Disable 
Label
Description
Error Disable
Recovery Interval
View the number of seconds (from 30 to 2592000) for the time interval of the recovery.
Reason Status
Error Disabled Reason
This field displays the supported features that allow the Switch to shut down a port or discard packets on a port according to the feature requirements and what action you configure.
Timer Status
Select this option to allow the Switch to wait for the specified time interval to activate a port or allow specific packets on a port, after the error was gone. De-select this option to turn off this rule.
Port Status
Port
This field displays the port number.
Error Disabled Reason
This field displays the supported features that allow the Switch to shut down a port or discard packets on a port according to the feature requirements and what action you configure.
Time Left (sec)
This field displays the time left in seconds.
Action
This field displays the action.